Brentwood Lane Neighbors

Hammers and Wrenches for Do-It-Yourself Enthusiasts

Some of the most commonly used tools for do-it-yourselfers are slide hammers, impact hammers and impact wrenches. In fact, the hammer has been used to deliver impact on objects since as early as 2,600,000 BCE. Today, it is used mainly to drive in nails, whereas the impact wrench is the evergreen tool used to drive them out.

The slide hammer is essential for those who like to tinker with cars. The user needs to hold the handle of this tool and screw or hook the end into a dent. When the weight installed on the slide hammer is whipped towards the handle, the resultant force exerted pulls out the dent easily.

While the slide hammer is a very useful tool for dent repair, it is imperative that the user exercises caution and control to avoid further damage to the automobile.

This tool finds its utility in learning the response of a system or component to impacts of varying amplitude and duration while conducting structural and modal analysis.

The impact hammer is struck on a mechanical structure mounted with accelerometers. The accelerometers collect response information. A single accelerometer yields transfer and transactional characteristics of the structure. Integrating the responses from several of these devices mounted at various strategic points facilitates modal analysis.

The most critical specifications for impact hammers are force and pulse duration, rated by minimums and maximums. Another common specification is the highest frequency for which the response will be tested, which may be changed by using accessory tips.

These striking tips are available in a range, differing in material composition and hardness. By their very nature, harder tips deform less and have shorter pulse duration than softer ones. Consequently, harder tips are used to measure the highest frequencies.

An impact wrench stores energy in a rotating mass. This stored energy may be compared to a hammer. When the trigger is pulled, a motor accelerates this energy and causes it to connect suddenly to the output shaft, an anvil of sorts. The sudden force releases very high torque with minimal effort at the user end. Thus, just like how a user applies relatively little force to a hammer but generates a great impact, so it is with the impact wrench.

Perhaps the most important benefit of these tools is that they are available in a formidable range of sizes and compositions, therefore facilitating users across industries ranging from product assembly to heavy construction.

About the Author

Matco Tools offers a wide range of professional hand tools, power tools, automotive service equipment & tool storage boxes. Matco Tool Boxes of every size, shape and color are best in the business made specially to cater to your every need.

Torque Wrench: 40000 ft-lbs with power drive.

Utica TCI-150FRD 1/2″ Drive Torque Ratchet Wrench Tool $149.00

S-K Microadjusting Torque Wrench 3/8″ Drive $94.00

CDI Dial Torque Wrench 3/8″ drive $36.99

12 POINT 1-1/8″ TORQUE WRENCH ADAPTER 3/4″ DRIVE $39.99

SNAP ON TOOLS 1/2 DRIVE 250 FOOT POUND TORQUE WRENCH $244.95

Proto 200 – 600 FT LB Micrometer Ratcheting Torque Wrench J6020AB 3/4″ Drive $31.01

Facom 3/8 DRIVE DIGITAL TORQUE WRENCH 6.7nm – 135nm $518.93

Facom DIGITAL 1/2 DRIVE TORQUE WRENCH 17nm – 340nm $575.54

Craftsman Microtork Torque Wrench, 20-150 ft. lbs., 1/2 in. Drive $40.00

New Neiko 3/4″ Drive 700 Ft Lb Automatic Torque Wrench $289.95

3/8″ Drive Reversible Torque Wrench 10-80FT-LB Clicker $22.95

T & E T0060 1/4″ Drive Micrometer Adjust Torque Wrench $49.95

Craftsman Torque Wrench 3/8 in Drive $30.00

SNAP-ON TORQUE WRENCH QD1R200 40-200″ LB 1/4″ DRIVE $149.99

SNAP ON 1/2 ” DRIVE TORQUE WRENCH REF. 256323-3 $100.00

45. Craftsman Microtork® Torque Wrench, 20-150 ft. lbs., 1/2 in. Drive 44595 $31.00

Snap On QD4R600 600lb-ft 3/4″ Drive Torque Wrench +Case $600.00

Klein Tools Micro-Adjustable Torque-Sensing Wrench w/ Square-Drive Ratchet 3/8″ $149.95

Snap On Tech3FR250 Electronic Techwrench Torque Wrench 25-250lbs 1/2 Drive Flex $201.50

MAC TOOLS TWV250 TORQUE WRENCH 1/2″ DRIVE 50-250 FT/LB $99.98

NEIKO PRO 3/4″ DRIVE 700 FT-LB TORQUE WRENCH AUTOMATIC $324.99

USGI Vehicle Hose Clamp Torque Wrench 1/4″ drive, 25″ # $7.00

SNAP ON 3/4″ DRIVE 600 FT LB TORQUE WRENCH, MODEL QJR-4600A, EXCELLENT $213.50

Snap-On 1/4 drive torque wrench $50.00

Snap On 3/4 Drive Large Click Clicker Torque Wrench 120 – 600 ft-lb QC4R600A $255.00

K-D Torque Wrench #2957 0-150 lbs 1/2” Drive – Used $34.50

New 1/4″ Drive Adjustable Torque Wrench Tool with Bits $29.99

MATCO T250FRA CLICK TORQUE WRENCH 1/2″ DRIVE TOOL USA $130.00

BikeMaster Tools 173205 TORQUE WRENCH 3/8 Inch Drive $50.99

DIGITAL TORQUE WRENCH 3/8″ DRIVE $239.00

3/8 drive Flex Head Micrometer Torque Wrench $139.09 Features and Benefits: Ratchet head flexes 15 degrees for access Sealed low profile head keeps out contaminants for durability and long life Micrometer twist lock ring prevents accidental change of torque setting during use Elastomer handle grip for oil reistance and superior comfort Torque Range 5-75 ft/lbs Included in a blow mold case GearWrench flex head micrometer torque wrenches allow for b…

ABC Products – 3 Piece ~ Flex Head – Stubby Ratchets (1/4”, 3/8” and 1/2” drive). $21.97 Set includes 1/4”, 3/8” and 1/2” drive ratchets ~~ Ratchet head pivots 90° in two directions, letting you reach out-of-the-way fasteners ~~ Easy to get into small places ~~ Made of chrome vanadium steel ~~ Seven position hinge handles….

KD Tools (Danaher) 1/2 Drive Electronic Torque Wrench 25-250 ft lbs – KDT85071 $259.99 Features and Benefits Three torque wrenches in one (25-250 ft lbs, 300-3000 in lbs, 33.9-339 Nm) provides superior versatility No need for mechanical recalibration which provides savings to the user Measures the maximum torque required to REMOVE an already installed fastener “Breakaway Torque.” Ideal when service manuals are not available or when working on 3rd party installed aftermar…

Powerbuilt 644044 1/2-Inch Drive Needle Torque Wrench $11.99 …

SE 3 Pc. Power Extension Socket Bits for Drills $0.99 Add versatility to your power drills. 3pc Power Extension Socket Adaptor has Hex bit for all power drill chucks. Comes in 3 Sizes : 1/4 in. , 3/8 in. & 1/2 in.for your full range of sockets….

Milwaukee 2691-22 18-Volt Compact Drill and Impact Driver Combo Kit $554.13 The 2691-22 M18 cordless 2-tool combo kit includes the Compact Driver (MWK-2601-20) and the 1/4″ Hex Impact Driver (MWK-2650-20). The M18 Cordless System’s patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by LITHIUM-ION, the M18 cordless system delivers more torque, mor…

Makita LXT211 18-Volt LXT Lithium-Ion Cordless 2-Piece Combo Kit $259.00 The Makita 18V LXT Lithium-Ion Cordless 2-Piece Combo Kit is built for the pro-user who requires Best in Class cordless tools for drilling, hammer drilling, driving and fastening. The LXT211 includes a versatile 1/2-inch hammer driver-drill, as well as a powerful impact driver that weighs just 3.3 pounds. Each tool is powered by Makita’s 18V LXT Lithium-Ion battery and the ENERGY STAR rated Makita…

ICM TRFE38- 3/8 SOCKET DRIVE TORQUE WRENCH TORQUE IN LBS. CAN BE CUSTOMIZED …

Mountain 16250 1/2-inch Drive Torque Wrench – 25-250 ft/lbs $210.01 Superceded: KTI72102Discontinued: CIA9250…

Gorilla Automotive TW605 Torque Wrench $39.95 Precision made, professional quality Adjustable Torque Wrench measures up to 150 ft/lbs. Kit Includes:1/2″ drive Torque Wrench 5″ extension bar 1/2″ x 3/8″ adapter Hardened steel and chrome plated impact resistant plastic case…

1/2" Drive Torque Wrench. Each $70.74 Manufacturer: K Tool International. Each. 25-250 ft/lbs. Clicks when torque is achieved. Packaged in plastic molded case. Customers also search for: Discount 1/2″ Drive Torque Wrench, Buy 1/2″ Drive Torque Wrench, Wholesale 1/2″ Drive Torque Wrench, 76962

TORQUE WRENCHES 1/4 DRIVE TORQUE WRENCH (30-200 IN.) $179.99 Steel, chrome-plated, adjustable torque wrenches let you determine the exact inch-pounds or foot-pounds of torque to apply when tightening barrel nuts, triggerguard screws, scope ring and base screws. Tightening to the same reading every time provides improved accuracy and shot-to-shot consistency. Turn and lock handle to set desired torque; wrench “clicks” when screw reaches proper tightness. Comfortable rubber handle provides a good grip, so you can control the amount of torque you’re applying. Impact-resistant, polycarbonate case provides protection and keeps wrench clean during storage. ¼” Drive torque wrench is adjustable from 30 to 200 in-lb., in one in-lb. increments. Accepts a SPECS: Steel, chrome plated; rubber covered handle. +/- 3% accuracy. ¼” (6.3mm) Drive – ¾” (1.9cm) O.D. 115⁄16″ (4.8cm) O.D. handle. 12½” (31.7cm) OAL. Includes ¼” to 3⁄8″ adapter. Adjustable 30-200 in-lb., 1 in-lb. increments. ½” (12.7mm) Drive – 1” (2.5cm) O.D. 1-5&#

3/8" Drive Torque Wrench. Each $42.87 Manufacturer: K Tool International. Each. Features Benefits: 20-200 in/lbs Clicks when torque is achieved Packaged in plastic molded case Customers also search for: Discount 3/8″ Drive Torque Wrench, Buy 3/8″ Drive Torque Wrench, Wholesale 3/8″ Drive

Torque Wrenches 1/2" Drive Torque Wrench $136.99 For AR-15/M16 Barrel Nuts Bolt Carrier Key or action screws on any rifle. Set the dial handle to desired torque; wrench "clicks" when the number is reached. Mfg: Brownells SPECS: Chrome-plated steel. 3/8" (9.5mm) Drive – 8-5/8" (21.9cm) long. ¾" (19.0cm) diameter handle. 30 – 150 inch pound range. ½" (2.7cm) Drive – 17-1/8" (43.5cm) long. 1" (2.5cm) diameter handle. 30 – 150 foot pound range. U.S. made.

Torque Wrenches 3/8" Drive Torque Wrench $174.99 For AR-15/M16 Barrel Nuts Bolt Carrier Key or action screws on any rifle. Set the dial handle to desired torque; wrench "clicks" when the number is reached. Mfg: Brownells SPECS: Chrome-plated steel. 3/8" (9.5mm) Drive – 8-5/8" (21.9cm) long. ¾" (19.0cm) diameter handle. 30 – 150 inch pound range. ½" (2.7cm) Drive – 17-1/8" (43.5cm) long. 1" (2.5cm) diameter handle. 30 – 150 foot pound range. U.S. made.

TORQUE WRENCHES 4DA96 TORQUE WRENCH 1/2 DRIVE WRENCH $136.99 For AR-15/M16 Barrel Nuts, Bolt Carrier Key or action screws on any rifle. Set the dial handle to desired torque; wrench “clicks” when the number is reached. SPECS: Chrome-plated steel. 3/8″ (9.5mm) Drive – 8-5/8″ (21.9cm) long. ¾” (19.0cm) diameter handle. 30 – 150 inch pound range. ½” (2.7cm) Drive – 17-1/8″ (43.5cm) long. 1″ (2.5cm) diameter handle. 30 – 150 foot pound range. U.S. made.

1/4 Drive Ratchet Torque Wrench 20-150 In Lb 1/4 Drive Ratchet Torque Wrench 20-150 In Lb $157.95 The CDI Micro-Adjustable Torque wrench is calibrated with a torque range of 20 to 150 in-lbs. it has an ergonomic handle for comfortable use and an easy to read laser-marked scale. The torque setting locks in place with a lock ring on the handle. When the torque setting is reached an impulse can be felt through the handle and an audible click is heard. This wrench features a standard reversible one fourths inch square drive and comes in a sturdy storage case. Mfg: Sinclair

Torque Wrenches 1/2" Torque Wrench $199.99 Steel chrome-plated adjustable torque wrenches let you determine the exact inch-pounds or foot-pounds of torque to apply when tightening barrel nuts triggerguard screws scope ring and base screws. Tightening to the same reading every time provides improved accuracy and shot-to-shot consistency. Turn and lock handle to set desired torque; wrench “clicks” when screw reaches proper tightness. Comfortable rubber handle provides a good grip so you can control the amount of torque you’re applying. Impact-resistant polycarbonate case provides protection and keeps wrench clean during storage. ¼" Drive torque wrench is adjustable from 30 to 200 in-lb. in one in-lb. increments. Accepts all ¼" a Mfg: California Torque Products SPECS: Steel chrome plated; rubber covered handle. +/- 3% accuracy. ¼” (6.3mm) Drive – ¾” (1.9cm) O.D. 115⁄16" (4.8cm) O.D. handle. 12½” (31.7cm) OAL. Includes ¼” to 3⁄8" adapter. Adjustable 30-200 in-lb. 1 in-lb. increments. ½” (12.7mm) Drive – 1” (2

Torque Wrenches 1/4" Torque Wrench $179.99 Steel chrome-plated adjustable torque wrenches let you determine the exact inch-pounds or foot-pounds of torque to apply when tightening barrel nuts triggerguard screws scope ring and base screws. Tightening to the same reading every time provides improved accuracy and shot-to-shot consistency. Turn and lock handle to set desired torque; wrench “clicks” when screw reaches proper tightness. Comfortable rubber handle provides a good grip so you can control the amount of torque you’re applying. Impact-resistant polycarbonate case provides protection and keeps wrench clean during storage. ¼" Drive torque wrench is adjustable from 30 to 200 in-lb. in one in-lb. increments. Accepts all ¼" a Mfg: California Torque Products SPECS: Steel chrome plated; rubber covered handle. +/- 3% accuracy. ¼” (6.3mm) Drive – ¾” (1.9cm) O.D. 115⁄16" (4.8cm) O.D. handle. 12½” (31.7cm) OAL. Includes ¼” to 3⁄8" adapter. Adjustable 30-200 in-lb. 1 in-lb. increments. ½” (12.7mm) Drive – 1” (2

1/2" Drive Torque Wrench 10 150 ft/lbs. Each $48.57 Manufacturer: K Tool International. Each. 10-150 Ft/lbs. Clicks when torque is achieved. Packaged in plastic molded case. Customers also search for: Discount 1/2″ Drive Torque Wrench 10 150 ft/lbs, Buy 1/2″ Drive Torque Wrench 10 150 ft/lbs, Wholesale 1/2

Leupold Ring Torque Wrench Leupold Ring Torque Wrench $92.95 Mark IV Torque Wrench will both tighten and loosen the mounting screws on Mark IV style rings. Delivers the proper amount of torque value (65-in lbs) for return to zero accuracy. 3/8 inch square drive requires socket. Mfg: Leupold

TORQUE WRENCHES 1/2 DRIVE TORQUE WRENCH (20-150 LBS.) $199.99 Steel, chrome-plated, adjustable torque wrenches let you determine the exact inch-pounds or foot-pounds of torque to apply when tightening barrel nuts, triggerguard screws, scope ring and base screws. Tightening to the same reading every time provides improved accuracy and shot-to-shot consistency. Turn and lock handle to set desired torque; wrench “clicks” when screw reaches proper tightness. Comfortable rubber handle provides a good grip, so you can control the amount of torque you’re applying. Impact-resistant, polycarbonate case provides protection and keeps wrench clean during storage. ¼” Drive torque wrench is adjustable from 30 to 200 in-lb., in one in-lb. increments. Accepts a SPECS: Steel, chrome plated; rubber covered handle. +/- 3% accuracy. ¼” (6.3mm) Drive – ¾” (1.9cm) O.D. 115⁄16″ (4.8cm) O.D. handle. 12½” (31.7cm) OAL. Includes ¼” to 3⁄8″ adapter. Adjustable 30-200 in-lb., 1 in-lb. increments. ½” (12.7mm) Drive – 1” (2.5cm) O.D. 1-5&#

1/4" Drive Electronic Torque Wrench. Each $130.08 Manufacturer: KD Tools. Each. Features and Benefits Combines accuracy of an electronic torque wrench with the speed and ease of a mechanical style Range from 12 to 120 in./lbs. with +/- 2% accuracy Red light and buzzer signal specify torque value has bee

Central Tools 3/4 drive Torque Wrench 100-600ft/lb. Each $325.49 Manufacturer: Central Tools. Each. 30 day warranty on material and workmanship Customers also search for: Discount Central Tools 3/4″ drive Torque Wrench 100-600ft/lb, Buy Central Tools 3/4″ drive Torque Wrench 100-600ft/lb, Wholesale Central Tools 3/4″ d

TORQUE WRENCHES 28033 TCI 150 3/8 DRIVE TORQUE WRENCH $174.99 For AR-15/M16 Barrel Nuts, Bolt Carrier Key or action screws on any rifle. Set the dial handle to desired torque; wrench “clicks” when the number is reached. SPECS: Chrome-plated steel. 3/8″ (9.5mm) Drive – 8-5/8″ (21.9cm) long. ¾” (19.0cm) diameter handle. 30 – 150 inch pound range. ½” (2.7cm) Drive – 17-1/8″ (43.5cm) long. 1″ (2.5cm) diameter handle. 30 – 150 foot pound range. U.S. made.